Twin Cam Parts


All parts for Twin Cam engines available including New cast cylinder blocks 701M 'L' Type

Fully machined 2 litre Alloy cylinder blocks, linered or Nikasil.

 90 mm forged pistons.

New dry sump engine kits available, 2 litre, 1600cc & 1700cc

Cylinder heads

New Cylinder Head castings in LM25TF Alloy, fully machined with unleaded seats, Colsibro valve guides, ported and polished.



New design EN40B steel crankshafts with, lightened counterbalance webs and bored out big end journals. 

Various strokes available.



EN19 Steel single counter balance webs, cross drilled wide journal crankshafts.



Con rods

Forged steel con rods, H and I section.






We carry a large stock of heavy duty race, mains, big ends and narrow journal bearings


New front covers, water pump assemblies and ancillaries.

 Various camshaft profiles and all cylinder head components available


Carburettors and accessories

Foam Air Filters



Stockists of Weber carburettors, wide range of trumpets, linkage joints, jets and accessories.

We stock a large range of foam filters, filter oils and can normally tailor make a filter to suit your needs.

Fuel Pumps and Regulators

Weber 48 DCO2sp Trumpets

Fast road / competition, injection and carburettor fuel pumps, pressure regulators and accessories

Weber 48 DCO2sp short 30mm long replacement, fully flared Alluminium trumpets.


Throttle Linkages

Universal, twin cable Weber throttle linkage

Fully rose jointed works type throttle linkage


Cam lid Domed Nuts

Polished Stainless Steel dome Cam Lid nuts



Steel Flywheels

A range of steel flywheels to suit most clutches.




Engine Stands

Steel tubular engine stands, ideal for transportation


Ignition systems


Lumeniton Optronic Performance ignition kit

Lotus 2.2 900 series Lucas constant energy electronic ignition kits

Lucas constant energy electronic ignition kits

Competition Rev Limiter

Competition Ignition System

  Adjustable rev limiter, can be adjusted to suit engine

An alternative to the Lucas Constant Energy kit is the Lumenition system complete with new base plate, rotor and pickup, this converts the original Lucas 43/45 DM distributors.

Rotor Arms

Have you had rotor arm reliability issues? Our Special rotor arms have been manufactured in Italy to overcome the problems which are now proven and tested. 


Engine Mounts

World Cup engine mounts


Dry and Wet sump Oil system parts

Dry sump installation kit for Mk 1 Mk 2 Escorts and Cortinas.


Works Escort type 2 gallon dry sump tanks, fully baffled. Smaller tanks suitable for kit cars and single seater installation. Dry sump pumps, H/P H/C oil pumps, oil cooler sandwich blocks and remote oil filters.


Alloy dry sump pans

Alloy dry Sump pans available, half trough for Escort installation or full trough for single seaters etc.

Exhaust systems

Large bore exhaust manifold 4 into 2 into 1.


Starter Motor

Competition Heavy Duty Pre Engaged Starter Motor



Alternator and bracket

Twin bolt Works Type alternator bracket kit. High powered alternator to suit.



Oil Caps

Cam lids

Standard caps CNC machined and polished in Alloy.

Alloy BRM cam lids. Wet or dry sump available.


Thermostats and  housings


Thermostats available in 75, 82 and 88 degrees

Thermostat housing with pressure cap to suit kit cars & single seaters when the radiator is lower than the engine

Remanufactured original thermostat housings with sensor boss


Gaskets and seals

All gaskets and seals available, including large bore heavy duty head gaskets.


Engines and Performance Parts distributed Worldwide

Part Price
Alloy cylinder block 90mm, 90.335, 90.424 bore 3345.00
Cast Iron Block 701M 'L' Type


Steel Crankshaft EN40B 63mm, 72.75mm, 77.6mm, 80.8mm, 84mm 

Steel Crankshaft EN19 72.75mm wide journal, cross drilled 6 bolt flywheel fixing 950.00

Steel Conrods 4.800", 4.826", 4.926", 5.230", (Specials to order) 


Steel Conrods H or I section from 


Steel Flywheels 6 or 12 bolt 81/2" clutch or 71/4" clutch 


Steel Jackshaft 


Dry sump pans (half trough)


Dry sump pan (full trough) 


Dry sump pump 4 or 5 port 


Dry sump pump 4 or 5 port with Tacho facility 


High pressure oil pump oil pump 


Water pump kit 

Polished Stainless Steel Cam Lid  Dome Nuts 1.00 (each)
BRM Cam Cover, Wet or Dry Sump POA

Valve springs - race kit 


Valve springs - double (per set)


Valve springs platforms 

3.15 (each)

Steel valve caps - std spring 

2.85 (each)

Steel valve caps - race spring 

5.50 (each)

Valve guides (cast) 

4.50 (each)

Valve guides (bronze) 

15.00 (each)

Cam followers 

18.00 (each)

Camshafts - various profiles available , fast road, rally, race, etc.      Per pair 


Camshafts - re profiled. Per pair 


Steel crank pulley 


Powergrip water pump drive kit 1/5 pitch x 1/2" wide 


Powergrip water pump drive kit 3/8 pitch x 1/2" wide 


Powergrip water pump drive kit 3/8 pitch x 1" wide 

Powergrip MAE/ Twin cam water pump drive kit 145.65

Rear cover 


Distributor (competition)


Lucas Electronic ignition kit (with distributor and coil) 

Lumenition Competition Electronic Ignition Kit 234.00
Lumenition Fitting Kit to convert Constant Energy distributor 22.00
Lumenition Fitting Kit to convert points distributor 43D4 22.75
Lumenition Rev Limiter 81.50

Big end bolts - Competition for standard rod 


Big end bolts 'V' type 


Big end bolts 'ARP' 

96.70 (set)

Poly V crank pulley 


Poly V water pump pulley 


Poly V alternator pulley 


Poly V belt 


Inlet Valve 1.560", 1.625", 1.700"   

17.54 (each)

Exhaust valve 1.375", 1.400", 1.440"  

17.54 (each)

83.5 Forged pistons including rings and pins 


Many More parts available, prices subject to change. All parts are + VAT.


We accept most major credit cards.