FORD CROSSFLOW PARTS

All Std and race parts available for the crossflow engine.

   

NEW Cast Cylinder Block

711M 1600 Cast Cylinder Blocks Standard bore

 

NEW Scat Crankshafts

Heavy duty version of Fords cast crank

 

Pistons

A variety of forged pistons.

Crankshafts, Rods and rocker assemblies

Steel cranks, H section steel Con rods and needle roller rocker assembly.

Con rods

Forged steel con rods, H and I section.

 

 

Bearings

We carry a large stock of heavy duty race, mains, big ends and narrow journal bearings

   

Crankshaft

New design EN40B steel crankshafts with, lightened counterbalance webs and bored out big end journals.

Various strokes available.

Cylinder heads

Heads modified from fast road to full race, side draft inlet manifolds for Weber carbs

 

Rocker Covers

 Alloy Rocker Covers wet or dry sump, with or without Wilcox name plate.

Carbs and manifolds

Weber side draft inlet manifolds.
 

   

Lumenition Ignition system

Lucas Ignition system

Lumeniton Optronic Performance ignition kit

 Lucas constant energy electronic ignition kits

   

Competition Rev Limiter

Competition Ignition systems

  Adjustable rev limiter, can be adjusted to suit engine

 

 An alternative to the Lucas Constant Energy kit is the Lumenition system complete with new base plate, rotor and pickup, this converts the original Lucas 43/45 DM distributors.

Rotor Arms

Have you had rotor arm reliability issues? Our Special rotor arms have been manufactured in Italy to overcome the problems which are now proven and tested.

 

 

Dry and Wet sump Oil system parts

 

Works Escort type 2 gallon dry sump tanks, fully baffled. Smaller tanks suitable for kit cars and single seater installation. Dry sump pumps, H/P H/C oil pumps, oil cooler sandwich blocks and remote oil filters.

 

Dry sump installation kit for Mk 1 Mk 2 Escorts

 

Alloy dry sump pans

Alloy dry Sump pans available, half trough for Escort installation or full trough for single seaters etc.

 

Oil pumps and gear drive kits

Camshaft gear drive kit and front mounted dry sump pumps.

 

 

Alternator and bracket

Twin bolt Works Type alternator bracket kit. High powered alternator to suit.

Starter Motor

Competition Heavy Duty Pre Engaged Starter Motor

 

Throttle Linkage

Universal, twin cable Weber throttle linkage.

 
     
 

Thermostats and  housings

 

Thermostats available in 75, 82 and 88 degrees 

Thermostat housing with pressure cap to suit kit cars & single seaters when the radiator is lower than the engine

Remanufactured original thermostat housings with sensor boss.

 

Carburettors and accessories

Foam Air Filters

      

 

Stockists of Weber carburettors, wide range of trumpets, linkage joints, jets and accessories.

We stock a large range of foam filters, filter oils and can normally tailor make a filter to suit your needs.

Fuel Pumps and Regulators

Weber 48 DCO2sp Trumpets

Fast road / competition, injection and carburettor fuel pumps, pressure regulators and accessories

Weber 48 DCO2sp short 30mm long replacement, fully flared aluminium trumpets.

Injection systems

Full electronic fuel injection kits available

 

Steel Flywheels

A range of steel flywheels to suit most clutches.

 

Engine Stands

 Steel tubular engine stands, ideal for transportation.

 

Engine Mounts

World Cup engine mounts

 

Gaskets and seals

All gaskets and seals available, including large bore heavy duty head gaskets.

 

 

 

Engines and Performance Parts distributed Worldwide

Part

Price

Cast 711M Cylinder Block Standard Bore £1410.00

Steel Crankshaft EN40B 63mm, 72.75mm, 77.6mm, 80.8mm, 84mm 

£1500.00
Scat Heavy Duty Crankshaft £700.00

Steel Conrods 4.800", 4.826", 4.926", 5.230", (Specials to order) 

£600.00

Steel Conrods H or I section 

£700.00

Steel Flywheels 6 or 12 bolt 81/2" clutch or 71/4" clutch 

£250.00

Dry sump pans (half trough) 

£365.00

Dry sump pan (full trough) 

£365.00

Dry sump pump 4 or 5 port 

£369.00

Dry sump pump 4 or 5 port with Tacho facility 

£369.00

High pressure oil pump  oil pump 

£88.00
Thermostat Housing £45.00

Water pump 

£52.50

Distributor (competition) 

POA

Lucas constant energy ignition kit with distributor and coil 

£385.00
Lumenition Competition Electronic Ignition Kit £234.00
Lumenition Fitting Kit to convert Constant Energy distributor £22.00
Lumenition Fitting Kit to convert points distributor 43D4 £22.75

Lumenition Rev Limiter

£81.50

Valve springs - double race (set)

£128.00

valve springs double rally 

£63.40

Valve springs - double - fast road (set) From

£63.40

Valve spring platforms 

£3.15 (each)
Titanium valve retain suit Race Springs 126.00 set

Steel valve retainers to suit Rally/Fast Road Springs

£62.00

Valve guides (cast) 

£4.50 (each)

Valve guides (bronze) 

£15.00 (each)

Cam followers   From

£134.00

Camshafts - many profiles available, fast road, rally, race etc          From

£175.00

Alloy rocker cover - wet or dry sump 

£108.00

Steel rocker shaft 

£70.20

Steel rocker posts 

£76.00

Steel rocker spacers 

£30.80

Steel crank pulley 

£58.00

Adjustable duplex gear set 

£122.00

Duplex chain 

£30.00

Powergrip water pump drive kit 1/5 pitch x 1/2” wide       FROM

£145.65

Powergrip water pump drive kit 3/8 pitch x 1/2” wide       FROM   

£145.65

Powergrip water pump drive kit 3/8 pitch x 1” wide       FROM

£176.00

Front cover 

POA

Rear cover 

£58.00

Big end bolts- Competition for standard con rod type 

£9.00

Big end bolts ‘ V ‘ type 

POA

Inlet manifold to suit side draft carbs       FROM         

POA

Poly V crank pulley 

£39.35

Poly V water pump pulley 

£39.35

Poly V alternator pulley 

£39.92
Poly V belt £ 18.34
Poly V Crank pulley boss and washer £61.16

Inlet Valve - 1.560,1.625,1.680,1.720 (5/16 or 9/32 stem diameter) 

£16.00(each)

Exhaust valve - 1.335,1.340,1.375,1.420 (5/16 or 9/32 stem diameter) 

£16.00each)

Off set dowel set 1-9 degree 

£ 70.00

Many More parts available, prices subject to change. All parts are + VAT.

 

We accept most major credit cards.

 

Home

Contact